How Do I Use My Barcode Scanner?
Inateck BCST-42 Bluetooth Barcode Scanner
Out of the Box
The usage has been simplified so it is not necessary to carry the instruction manual during use for most users.
- BCST-42 is on the silent and vibrate mode by default. If you would like to turn on sound notifications, please manually configure the scanner according to the instruction manual.
- The independent power switch can prevent maloperation when you put the scanner in the pocket.
- To save power, it will automatically enter sleep mode after 3 minutes of inactivity. You may reset the auto sleep time if needed.
Shortcuts
2.4G /Bluetooth Pairing: Long press the M buttonInventory/Normal Mode Switch: Long press the scanning button and the M button at the same time.
Quick Check on Battery Level: Short press the M button.
Wireless Adapter/Bluetooth Mode Switch: Long press the M button and switch on the scanner simultaneously.
iOS Virtual Keyboard: Long press the scanning button for 3s to invoke it.
Connection Methods
USB Mode: Plug and play.
Bluetooth Mode: With the built-in Bluetooth 5.0 module, this scanner can be connected with your devices such as a mobile phone, tablet or a laptop, no adapter required.
2.4G Adapter Mode: Default mode, plug and play. Even PCs without Bluetooth function can work with the scanner in wireless mode.
Note: The scanner is in 2.4G adapter mode by default. If you'd like to connect it with your device via Bluetooth, please first switch to Bluetooth mode by pressing the shortcut button or scanning the command barcode according to the quick-setting user guide or the instruction manual.
Product FAQ
What can I do if my scanner doesn't work in Bluetooth wireless mode?To resolve this issue, please refer to the troubleshooting steps below first:
- Make sure your scanner has wireless function.
- Try the scanner with different Bluetooth devices to see if the wireless function works.
- Charge the scanner for 3~4 hours and check if the LED light is on.
- Restore the scanner to factory defaults.
- Delete the Bluetooth pairing record on your device, and re-pair them according to the user manual.
What can I do if the red beam comes on but the barcode cannot be recognized?
To resolve this issue, please refer to the troubleshooting steps below first:
- Make sure the scanner is well connected with your device.
- Check if your scanner is configured to read this type of barcode.
- Scan the barcode from different distance.
The scanner works well in wired mode but it gives wrong scans in Bluetooth mode.
To resolve this issue, please refer to the troubleshooting steps below first:
- If the scanner is working with Mac OS or iOS, please program the scanner to Mac OS/iOS mode according to the manual.
- Make sure the scanner's language matches the language of your device.
- Decrease the data transmission speed. The data transmission interval is 0ms by default. You can set the data ransmission Interval to 64ms or 96ms if necessary.
How to connect Inateck Bluetooth Barcode Scanner?Please refer to this complete Inateck bluetooth barcode scanner pairing guide